KT200II Bosch EDC7UC31 ECU support must be checked against the exact controller record. The public KT200II database currently contains 84 matching ECU records for Bosch EDC7UC31 across the captured applications. That count is a navigation aid, not a promise that every vehicle or revision uses the same method.
Support Snapshot
| Controller | Bosch EDC7UC31 |
|---|---|
| Database records | 84 |
| Example brands | AFT, Agrale, Agrifac, Astra, Case, Claas, Deutz, Dieci, Doosan, Faw Jiefang, Fendt, Ford, Hino, International |
| Vehicle types | tractor, truck, car, marine |
| Listed methods | R/W OBD; R/W BENCH MODE / JTAG; R/W JTAG |
| Chip or memory examples | MPC561/562 EEPROM; MPC5xx |
Example Bosch EDC7UC31 Records
The following examples are taken from the current public support list. Empty fields in the source are shown as a dash. Search the live database before a job because records can change.
| Brand | Model | Engine/Transmission | Chip/Memory | Listed method |
|---|---|---|---|---|
| AFT | Zenith 2 | Tier 4A | — | R/W OBD |
| AFT | — | — | MPC561/562 EEPROM | R/W BENCH MODE / JTAG |
| Agrale | — | — | MPC561/562 EEPROM | R/W BENCH MODE / JTAG |
| Agrifac | WKM – BIG SIX | Deutz | — | R/W OBD |
| Astra | HD7 | Cursor 8.0/13.0l | — | R/W OBD |
| Astra | HD8 | Cursor 8.0/13.0l | — | R/W OBD |
| Case | CVX | 6.6l 140—195CV | — | R/W OBD |
| Case | Farmall | A,C,U | — | R/W OBD |
| Case | Magnum | 9.0l 250—310CV | — | R/W OBD |
| Case | Maxxum | 6.7l 110—140CV | — | R/W OBD |
| Case | Maxxum | 6.7l 150 Stage 5 | — | R/W OBD |
| Case | Puma | 6.7l 125—210CV | — | R/W OBD |
Identify the Exact Controller
Confirm the controller maker and family on the physical label. Record the vehicle, part number, hardware, software, processor and connector orientation. Do not select a protocol only because the family name looks similar; suffixes and revisions matter.
Choose Only a Listed Operation
Read/write abbreviations and OBD, Bench, Boot, JTAG or BDM wording describe the operations listed for a specific record. They do not mean every memory area or connection method is available on every application. Match the whole row.
Interpret the Record Conservatively
A database row combines several constraints: vehicle application, controller maker and family, processor or memory information, operation and connection method. Treat empty cells as information to verify, not permission to assume. A row for one brand can help identify a controller family, but it cannot automatically prove support for the same-looking unit in another application or market.
Confirm the Physical Unit Before Applying Power
Compare the label, connector keying, case and board revision with the documented procedure. Photograph the unit from enough angles to preserve connector orientation. With power removed, inspect for water entry, corrosion, previous opening, lifted pads, bent pins or repair history. An electrically damaged or previously modified unit may not behave like a known-good example even when the label matches.
Preparation Checklist
- authorization and job objective confirmed;
- physical label photographed and transcribed;
- live support record saved;
- correct cable, adapter and connector orientation verified;
- power and ground checked under load;
- software and hardware package confirmed;
- original identification and available memories backed up;
- target file matched to hardware and software;
- supported recovery route understood before writing.
File and Backup Rules
Keep the untouched original read and identification in a read-only archive. A file with the right family name or size can still belong to another revision. Verify the relationship between hardware, software, calibration, memory type and intended operation.
Decide Whether to Continue
Continue only when the label, database entry, method, cable, power plan and file context agree. Pause if the software identifies a different family, if repeated reads differ, if a pinout source conflicts with the connector, or if the available backup does not cover the planned operation. Capture the disagreement in the job record so support can answer a precise question.
Recovery and Escalation Notes
Before writing, note whether the exact record provides a documented recovery route and which original memories have been saved. If communication fails, do not cycle through unrelated protocols or random files. Preserve power conditions and logs, record the last completed step, then ask for controller-specific guidance. The best recovery evidence is the state captured before and during the first failure.
Post-Programming Checks
After a supported write, confirm stable communication, controller identification, diagnostic state and normal vehicle or transmission behavior according to the repair procedure. Preserve logs and final file names in the job record.
Official KT200II Resources
- Search the KT200II Support List
- Check KT200II software guidance
- Compare KT200II versions
- Verify the current official contact channel
Frequently Asked Questions
Does KT200II support every Bosch EDC7UC31?
No universal claim should be made. The database contains 84 matching records, but the exact vehicle and controller revision must match.
Which connection mode should I use?
Use the method listed for the exact database row. Do not infer the method from another vehicle using the same family name.
Can I write a same-size file from another controller?
File size alone does not prove compatibility. Match hardware, software, calibration and memory operation.
What should I send to support?
Send the controller-label photo, vehicle details, hardware/software identifiers, selected record, software version and exact message or log.
Final Takeaway
Use the database as a controller-level decision tool. Exact identity, listed method, stable power and validated backups matter more than a broad family name.